Header
Home | Set as homepage | Add to favorites
  Search the Site     » Advanced Search
Sections
Syndication


Blogroll:

||||| ALL Cisco-Network ARTICLES |||||  
CCIE Journey,
The CCIE Journey,


Copying an IOS Image to a Server

Jul 21,2008 by admin

image

Copying an IOS Image to a Server Problem You want to save a backup copy of your IOS image on a TFTP server. Solution You can upload a copy of your router's IOS image to a TFTP server with the following set of commands: Freebsd% touch /tftpboot/c2600-ik9o3s-mz.122-12a.bin Freebsd% chmod 666 /tftpboot/c2600-ik9o3s-mz.122-12a.bin Freebsd% telnet Router1 Trying 172.25.1.5... Connected to Router1. Escape character is '^]'. User Access Verification Password: Router1>enable Password: Router1#copy flash:c2600-ik9o3s-mz.122-12a.bin tftp Address or name of remote host []? 172.25.1.1 Destination filename [c2600-ik9o3s-mz.122-12a.bin]? !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 11135588 bytes copied in 52.588 secs (211752 bytes/sec) Router1# Discussion Before attempting to upgrade the IOS version of a router it's a good idea to save a copy of the current IOS image. This way, if an upgrade fails or if you have problems with the new IOS version, you can revert back to the old proven IOS version. The procedure to copy an IOS image to a TFTP server is very similar to the way we backed up a configuration file in Recipe 1.2. The only real difference is the size of the file involved, since IOS images are quite a bit larger than configuration files. As we mentioned in Recipe 1.2, you have to watch out for the file permissions on your TFTP server. The transfer will fail if this file isn't world writable. We highly recommend that you remove the world-writable attribute on this file after uploading it. On Unix systems, you can use the chmod command to change the file attributes. This will ensure that the file isn't accidentally overwritten. Unlike configuration files, which you should never store in your TFTP directory, IOS images pose no security concerns, as long as they are not world writeable. See Also Recipe 1.2; Recipe 1.6
442 times read

Related news

» Using SNMP to Copy a New IOS Image
by admin posted on Jul 21,2008
» Saving Router Configuration to Server
by admin posted on Jul 21,2008
» Loading a New IOS Image
by admin posted on Jul 21,2008
» Using the Router as a TFTP Server
by admin posted on Jul 21,2008
» Using SNMP to Modify a Router's Running Configuration
by admin posted on Jul 21,2008
Did you enjoy this article?
(total 0 votes)

comment Comments (0 posted) 

More Top News
CCSP-Cisco Certified Security Professional
Most Popular
Most Commented
Featured Author