Assigning an IP Address to VLAN 10

Assigning an IP Address to VLAN 10

SW1-MSFC3#config terminal

Enter configuration commands, one per line.  End with CNTL/Z.

SW1-MSFC3(config)#interface vlan10

SW1-MSFC3(config-if)#ip address 10.10.10.1 255.255.255.0

SW1-MSFC3(config-if)#no shut

After the IP address is configured and the interface is enabled, the switch will recognize that ports 1/1 through 1/16 are assigned to VLAN 10 via the Catalyst OS interface and VLAN 10 will come up. (See Example 5-16.)