Sample SNMP Configuration on SW1

Sample SNMP Configuration on SW1

SW1#config t

Enter configuration commands, one per line.  End with CNTL/Z.



SW1(config)#access-list 10 permit 10.10.10.2

SW1(config)#snmp enable

SW1(config)#snmp-server community alpha ro 10

SW1(config)#snmp-server community beta rw 10

SW1(config)#snmp-server contact John Smith (555)789-2653

SW1(config)#snmp-server location Denver Data Center

SW1(config)#snmp enable traps

SW1(config)#snmp trap-source lo0

After SNMP is configured on SW1, the statistics can be viewed using the show snmp command, as shown in Example 7-56.