MGCP CAC Configuration

version 12.2
!
! Output omitted for brevity
!
! The following command is used in MGCP SA Agent CAC.
call fallback active
! The following command is used in MGCP RSVP CAC.
call rsvp-sync
! The following six commands are used in MGCP SRC CAC.
call threshold global cpu-5sec low 55 high 70 treatment
call threshold global cpu-avg low 70 high 80 treatment
call threshold global total-mem low 70 high 80 treatment
call threshold global io-mem low 70 high 80 treatment
call threshold global proc-mem low 70 high 80 treatment
call threshold global total-calls low 10 high 12 treatment
!
! Output omitted for brevity
!
interface FastEthernet0/0
ip address 192.168.1.61 255.255.255.0
duplex auto
speed auto
! The following command is used in MGCP RSVP CAC to configure the bandwidth allocated.
! for VoIP calls through the interface.
ip rsvp bandwidth 512 512
!
! Output omitted for brevity
!
mgcp
mgcp call-agent 10.13.57.88 service-type mgcp version 1.0
mgcp modem passthrough voip mode nse
mgcp modem passthrough voaal2 mode
mgcp package-capability trunk-package
! The following command is used for MGCP SA Agent CAC.
mgcp rtrcac
! The following command is used in MGCP SRC CAC.
mgcp src-cac
no mgcp timer receive-rtcp
!
mgcp profile default
!
dial-peer voice 1 pots
application mgcpapp
port 3/0:1
!
dial-peer voice 2 pots
application mgcpapp
port 3/0:2
!
dial-peer voice 3 pots
application mgcpapp
port 3/1:1
!
dial-peer voice 4 pots
application mgcpapp
port 3/1:2
!
! The following command is used in MGCP SA Agent CAC.
rtr responder
!
!
Output omitted for brevity
!
end