IP Centrex
Centrex service is
regarded as an "outsourcing" of telephony call services. Centrex does not
maintain a PBX on customer premises. Instead, Centrex service removes the PBX
function from the customer premises, provides a Centrex trunk to the customer,
and provides the telephony services over the trunk. Typically, the Centrex trunk
is arranged as a TDM channel associated signaling (CAS) circuit or as an ISDN
Q.931 connection. Customer billing for this service is similar to the billing
for outsourcing services.
IP Centrex performs the same job as a PBX but delivers the
service over an IP network instead of a circuit-switched network. Service is
accessed via an IP network and delivered to customers in a private or
multitenant installation. The call control functions that Centrex delivers
include:
-
Dial tone
-
Interpretation of dialed digits
-
Determination of called party status
-
Call status return to caller, such as busy and ringback
-
Call to voice mail reroute, if applicable
-
Billing services
Cisco delivers IP Centrex through the use of a call agent, such
as the Cisco BTS 10200 Softswitch. Figure
B-5 illustrates the use of a call agent for the Centrex services that are
delivered to telephones with the trunking gateway serving as a path to the PSTN.
Notice that Media Gateway Control Protocol (MGCP) acts as the gateway control
protocol because the call routing intelligence resides in the call agent, which
is maintained by the service provider.
Sections
Comments (0 posted)
Syndication
